IGBT Driver for for 1.2kV to 3.3kV High Power Modules such as IHV, IHM, HiPAK™ and others., HPM - Fiber Series
The AgileSwitch HPFM-HPM Fiber driver provides monitoring and fault reporting information to enable better control and analysis of an IGBT-based power system. The HPFM provides up to 30 Amps of peak current at an operating frequency up to 15 kHz. The driver includes an isolated DC/DC converter and provides a single fault that is reported via the dual channel fiber I/O. All AgileSwitch drivers use automotive temperature grade components and allow for modifying settings of gate resistors and active clamping. Optimized for High Speed Trains & Mass Transit, Induction Welding, Solar/PV, Industrial Drives, Induction Heating and Wireless Charging applications, these gate drivers are UL compliant for modules rated up to 3.3kV.
Osnovni podaci:
Oznaka proizvođača | HPFM-00117 |
Dodací lhůta dalšího množství | !_on request_! |
Type of casing: | MODUL |
Kategorie | IGBT |
Vrsta komponente: | !_driver igbt_! |
Konfiguracija: | !_low or high sid_! |
Specifikacija: | !_1-channel_! |
Broj krugova | 1 ks |
RoHS | Da |
REACH | Ne |
NOVINKA | A |
RoHS1 | Ano |
Pakiranje i težina:
Jedinica: | kom |
Težina: | 100 [g] |
Tip ambalaže: | BOX |
Mali paket (Broj jedinica): | 5 |
Elektrofizički parametri:
Udc (URRM, UCEO, Umax) | 3300 [V] |
Udc-sup.min (Min.Supply DC Voltage) | 14.3 [V] |
Udc-sup.max (Max.Supply DC Voltage) | 17.5 [V] |
Uisol (@25°C/1min/50Hz) | 6000 [V] |
UDC-OUT (off/min) | -10 [V] |
UDC-OUT (on/max) | 16 [V] |
IOUT puls (Log.1=ON) (TA=25°C) | 30 [A] |
IOUT puls (Log.0=OFF) (TA=25°C) | -30 [A] |
du/dt (critical rate of rise of on-state voltage) | 50000 [V/µs] |
Pd-bez chladiče (Ta=25÷75°C) | 7 [W] |
Input Logic Level (Ugs level) | 15V |
tf (turn-off=fall time) | 500 [ns] |
Ft (transition/operation frequency) (@Inom.) | 0.015 [MHz] |
Cin/CL Load Capacitance | 1000 pF |
Toplinske i mehaničke parametre:
Tmin (minimalna radna temperatura) | -40 [°C] |
Tmax (maksimalna radna temperatura) | 85 [°C] |
PIN dimenzije | 0.00 [mm] |